Lithium Complex Grease with Molybdenum Disulfide

Thickened by new complex thickening agent, SINOPEC Lithium Complex Grease with Molybdenum Disulfide is made from deeply refined mineral oil with molybdenum disulfide anti-wear agent and other additives through special technical process. According to GB/T 7631.8-90(ISO6743/9-1987), it can be classified as follow:L-XBFBB 1,L-XBFBB 2,L-XBFBB 3.

 

 


Features & Benefits

    ·  Outstanding EP and anti-wear properties. Effectively reduce abrasion and pitting on friction pairs and extend service life.

    ·  Excellent high temperature performance. Can be used under higher temperature.

    ·  Outstanding mechanical stability and oxidation stability to ensure longer drain period.

    ·  Very good anti-water and rust resistant properties and good protective ability.

    ·  Do not contain any heavy metal, nitrite and any other chemicals that will do harm to human’s health and pollute environment.

Technical specification

    ·  Meets the following performance specification: Q/SH303 348—2004

Application

    ·  It is suitable for high temperature and heavy-load equipment in metallurgical industry, also can be applied other devices in printing and dyeing industry, high capacity motor, kiln car and hot oil pump.

    ·  Application temperature range::-20ºC to 180ºC.

Typical Properties

ItemsTypical  PropertiesTest Methods
123
Worked  Cone Penetration,0.1mm332280237ASTM D217
Dropping  Point,ºC   272279300ASTM  D2265
Copper  Corrosion (T2 copper strip,100ºC,24h)passpasspassJIS  K 2220.5.5
Leakage (104ºC,6h),g   0.030.020.05ASTM  D1263
Corrosion prevention (52ºC,48h), grade111ASTM  D1743
EP propertiesASTM D2783
Weld  Point,  PD,N245224522452

Attentions

    ·  Prevent water and impurities during storage and transportation.

    ·  Do not mix with other type of grease.

    ·  Do not heat before using.