Lithium Complex Grease

Thickened by complex metal soap, SINOPEC Lithium Complex Grease is made from deeply refined mineral oil with EP and anti-wear additives, rust and oxidation inhibitors through special technical process. According to GB/T 7631.8-90(ISO6743/9-1987), it can be classified as follow:L-XBEEB0.

 

 


Features & Benefits

    ·  Excellent high temperature performance. It can remain on spot at friction pairs under high temperature.

    ·  Good EP and anti-wear properties. Satisfy lubricating requirements for bearings of heavy load or impact load equipment.

    ·  Excellent oxidation resistant performance. Ensure longer service life during application process.

    ·  Excellent low temperature pumpability character.

    ·  Do not contain any heavy metal and nitrite that will do harm to human’s health and pollute environment.

Technical specification

    ·  Meets the following performance specification: Q/SH303 346—2004

Application

    ·  It is used for centralized lubricating system of rolling mill and rolling bearing in metallurgical industry. It also can be used for lubricating bearings in mine industry, machinery etc.

    ·  Application temperature range:-20ºC to 160ºC.

Typical Properties

ItemsTypical  PropertiesTest Methods
0
Worked  Cone Penetration,0.1mm368ASTM D217
Dropping  Point,ºC                                 266ASTM  D566
Copper Corrosion (T2 Copper,100ºC,24h)passJIS  K 2220.5.5
EP properties178ASTM D2509
Timken  OK Load, N         
Corrosion Prevention (52ºC,48h),grade2ASTM  D1743

Attentions

    ·  Prevent water and impurities during storage and transportation.

    ·  Do not mix with other type of grease.

    ·  Do not heat before using.